Description
Our Heavy Duty single axle trailers offered as a tipper, gives you easy access for ride-on mowers, quad bike or great assistance removing your load. A great heavy duty tipping trailer.
100% New Zealand made by Kea Trailers
Kea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.
Features
- All chassis are manufactured completely in Hamilton, New Zealand
- The chassis are all hot dip galvanised locally
- Available with an aluminium treadplate or hardwood transportation ply decking.
- Heavy-duty tipping mechanism to allow deck tilt
- Quality components used throughout the trailer
- Pressed steel side panels
- Pressed steel mudguards with braces front and rear
- Fully welded construction
- Mitred corners on chassis
- Wiring loom runs inside drawbar and chassis through wiring grommets
- Nylon bushed springs fitted with an anti-rattle hangar
- Stainless steel D-shackles
- Plug holder & B4 plug fitted (Round plugs also available upon request)
- Tie points conveniently located under the trailer
- Heavy-Duty electroplated steel safety chain
- Duo-fit coupling fits both 1 7/8” and 50mm tow balls
- Multi-volt sealed LED Lights fitted
- Lamps fitted within the rear channel at the full width of the trailer for clear visibility
- Premium, Marine sealed Japanese bearings
- 1500KG Applies to K85ST Made after April 2022. Models prior to April 2022 this are 1200KG GVM.
Some photos may show optional extras.
Our Heavy Duty single axle trailers offered as a tipper, gives you easy access for ride-on mowers, quad bike or great assistance removing your load. A great heavy duty tipping trailer.
100% New Zealand made by Kea Trailers
Kea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.
Features
- All chassis are manufactured completely in Hamilton, New Zealand
- The chassis are all hot dip galvanised locally
- Available with an aluminium treadplate or hardwood transportation ply decking.
- Heavy-duty tipping mechanism to allow deck tilt
- Quality components used throughout the trailer
- Pressed steel side panels
- Pressed steel mudguards with braces front and rear
- Fully welded construction
- Mitred corners on chassis
- Wiring loom runs inside drawbar and chassis through wiring grommets
- Nylon bushed springs fitted with an anti-rattle hangar
- Stainless steel D-shackles
- Plug holder & B4 plug fitted (Round plugs also available upon request)
- Tie points conveniently located under the trailer
- Heavy-Duty electroplated steel safety chain
- Duo-fit coupling fits both 1 7/8” and 50mm tow balls
- Multi-volt sealed LED Lights fitted
- Lamps fitted within the rear channel at the full width of the trailer for clear visibility
- Premium, Marine sealed Japanese bearings
- 1500KG Applies to K85ST Made after April 2022. Models prior to April 2022 this are 1200KG GVM.
Some photos may show optional extras.