{"title":"Tandem Trailers","description":null,"products":[{"product_id":"kea-kc106-tandem-trailer","title":"Kea KC106 Tandem Trailer","description":"\u003cp\u003eHeavy duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (2000KG GVM)","offer_id":67388734472441,"sku":"KEA-KC106-11-2225","price":9460.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388734505209,"sku":"KEA-KC106B-2226","price":11390.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/IMG_0008-Small.jpg?v=1792185459"},{"product_id":"kea-kc96-tandem-trailer","title":"Kea KC96 Tandem Trailer","description":"\u003cp\u003eHeavy duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (2000KG GVM)","offer_id":67388735291641,"sku":"KEA-KC96-1-1180","price":9050.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388735324409,"sku":"KEA-KC96B-1181","price":10980.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/KC96-front-corner.jpg?v=1792185468"},{"product_id":"kea-kc95-tandem-axle-hydraulic-tipper","title":"Kea KC95 Tandem Axle Hydraulic Tipper","description":"\u003cp\u003eThe KC95 hydraulic tipping trailer has a deck area of 2740mm x 1500mm. It is fitted with 185\/R14 commercial tyres on heavy duty galvanised steel rims which are connected to marine sealed tapered roller bearing hubs. Complete with compensating tandem rocker suspension system, the KC95HYD has a GVM of 2500Kg. Spare wheel, hydraulic override disc brakes and a heavy duty jockey wheel which features a built-in park brake are fitted as standard. The tipping is done via an electric over hydraulic pump with on board battery and remote control.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncludes\u003c\/li\u003e\n\u003cli\u003eHydraulic override disc brakes\u003c\/li\u003e\n\u003cli\u003eSpare Wheel\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Jockey wheel\u003c\/li\u003e\n\u003cli\u003eStandard tail gates\u003c\/li\u003e\n\u003cli\u003e12V deep cycle battery to enable the tipping function from it’s own independent power supply\u003c\/li\u003e\n\u003cli\u003eController to operate\u003c\/li\u003e\n\u003cli\u003eOptional Features\u003c\/li\u003e\n\u003cli\u003eTop pivot tailgate\u003c\/li\u003e\n\u003cli\u003eAluminium treadplate deck or hardwood marine ply\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Default Title","offer_id":67388740043001,"sku":"KEA-KC95HYD.BP","price":19860.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/KC95-Tandem-Axle-Hydraulic-Tipper-1.jpg?v=1792185488"},{"product_id":"kea-kc1678-flat-deck-trailer","title":"Kea KC1678 Flat Deck Trailer","description":"\u003cp\u003eThe flat decks trailers are designed for builders, hire centres, orchardists, machinery dealers, building material retailers, roofing contractors in fact anyone needing a large deck area trailer that can be loaded with a fork lift. Includes double eye, nylon bushed, 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003cp\u003eThe KC1678 at 2500Kg GVM comes with hydraulic single axle override disc brake system and a double safety chain. Fitted with 195\/50-13” 8 ply, and braked Jockey Wheel.\u003c\/p\u003e\u003cp\u003eThe KC1678 at 3500Kg GVM is fitted with 195R14C tyres with both axles hydraulic braked using a multivolt credo brake away system and wireless cabin remote. Heavy-duty drawbar Jack stand included.\u003c\/p\u003e\u003cp\u003eOptional Extras:\u003c\/p\u003e\u003cp\u003eFold-down sides and Drop in Headboard\u003c\/p\u003e\u003cp\u003eFixed Headboard only\u003c\/p\u003e\u003cp\u003eFolding Headboard Only\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eSturdy tie down rail fitted to both sides and front\u003c\/li\u003e\n\u003cli\u003eLow flat deck height\u003c\/li\u003e\n\u003cli\u003eFitted with 13″ low profile 8 ply radial tyres (unless 3500kg GVM)\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"2500KG","offer_id":67388744597753,"sku":"KEA-KC1678-2500KG-739","price":15840.0,"currency_code":"NZD","in_stock":true},{"title":"3500KG","offer_id":67388744630521,"sku":"KEA-KC1678-3500KG-740","price":23440.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/20150605_144540_resized_4.jpg?v=1792185519"},{"product_id":"kea-kc1268-flat-deck-tandem-trailer","title":"Kea KC1268 Flat Deck Tandem Trailer","description":"\u003cp\u003eThe flat decks trailers are designed for builders, hire centres, orchardists, machinery dealers, building material retailers, roofing contractors in fact anyone needing a large deck area trailer that can be loaded with a fork lift.\u003c\/p\u003e\u003cp\u003eOptional Extras:\u003c\/p\u003e\u003cp\u003eFold-down sides and Drop in Headboard\u003c\/p\u003e\u003cp\u003eHydraulic Brake Upgrade\u003c\/p\u003e\u003cp\u003eFixed Headboard only\u003c\/p\u003e\u003cp\u003eFolding Headboard Only\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eSturdy tie down rail fitted to both sides and front\u003c\/li\u003e\n\u003cli\u003eLow flat deck height\u003c\/li\u003e\n\u003cli\u003eFitted with 13″ low profile 8 ply radial tyres\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (2000KG GVM)","offer_id":67388744794361,"sku":"KEA-KC1268-758","price":10030.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388744827129,"sku":"KEA-KC1268-759","price":11960.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/KC1268-Flat-Deck-Tandem-Trailer.jpg?v=1792185521"},{"product_id":"kea-kc126-tandem-trailer","title":"Kea KC126 Tandem Trailer","description":"\u003cp\u003eHeavy duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (2000KG GVM)","offer_id":67388745253113,"sku":"KEA-KC126-756","price":9820.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388745285881,"sku":"KEA-KC126-757","price":11750.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/20171012_1441170.jpg?v=1792185525"},{"product_id":"kea-kc105-tandem-trailer","title":"Kea KC105 Tandem Trailer","description":"\u003cp\u003eHeavy duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (2000KG GVM)","offer_id":67388745384185,"sku":"KEA-KC105-752","price":8750.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388745416953,"sku":"KEA-KC105-753","price":10680.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/KC105-front-corner-close-old-pic.jpg?v=1792185527"},{"product_id":"kea-kc95-tandem-trailer","title":"Kea KC95 Tandem Trailer","description":"\u003cp\u003eHeavy duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (2000KG GVM)","offer_id":67388745580793,"sku":"KEA-KC95-750","price":8390.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388745613561,"sku":"KEA-KC95-751","price":10320.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/SKU5058013-KC-95.jpg?v=1792185530"},{"product_id":"kea-kc85-tandem-trailer","title":"Kea KC85 Tandem Trailer","description":"\u003cp\u003eHeavy duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance and have unique KEA bolts with grease nipples on all moving parts. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised.\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eUnique KEA bolts with grease nipples on all moving parts\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chains\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"No Brakes (2000KG GVM)","offer_id":67388745646329,"sku":"KEA-KC85-UNBRAKED-748","price":8050.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2500KG GVM)","offer_id":67388745679097,"sku":"KEA-KC85-BRAKED-749","price":9980.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/KC85-front-corner-close.jpg?v=1792185532"},{"product_id":"kea-kc846-tandem-trailer","title":"Kea KC846 Tandem Trailer","description":"\u003cp\u003eCurrently On Special – See Special Details\u003c\/p\u003e\u003cp\u003eLight duty tandem with double eye nylon bushed 5 leaf springs on compensating tandem axle suspension. All moving parts are nylon bushed for reduced maintenance. Link plates and rocker hangers are fitted with hexagon washers to prevent the lubricated bolts from turning and reducing wear on these parts. All these components, including springs are galvanised. The Kea KC846 tandem trailer has a deck area of 2440mm x 1350mm. It is fitted with 175\/70\/13 tyres on heavy duty galvanised rims fitted to marine sealed tapered roller bearing hubs. Complete with compensating tandem rocker suspension, the KC846 has a GVM of 1500Kg\u003c\/p\u003e\u003ch3\u003e100% New Zealand made by Kea Trailers\u003c\/h3\u003e\u003cp\u003eKea have been building trailers in Hamilton for more than 40 years. Every chassis is made in-house and hot dip galvanised locally, with nylon-bushed, greaseable moving parts so it keeps working for decades. Kea back every trailer with a 5 year warranty.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll chassis are manufactured completely in Hamilton, New Zealand\u003c\/li\u003e\n\u003cli\u003eThe chassis are all hot dip galvanised locally\u003c\/li\u003e\n\u003cli\u003eAvailable with an aluminium treadplate or hardwood transportation ply decking.\u003c\/li\u003e\n\u003cli\u003eQuality components used throughout the trailer\u003c\/li\u003e\n\u003cli\u003ePressed steel side panels\u003c\/li\u003e\n\u003cli\u003ePressed steel mudguards with braces front and rear\u003c\/li\u003e\n\u003cli\u003eFully welded construction\u003c\/li\u003e\n\u003cli\u003eMitred corners on chassis\u003c\/li\u003e\n\u003cli\u003eWiring loom runs inside drawbar and chassis through wiring grommets\u003c\/li\u003e\n\u003cli\u003eNylon bushed springs fitted with an anti-rattle hangar\u003c\/li\u003e\n\u003cli\u003eStainless steel D-shackles\u003c\/li\u003e\n\u003cli\u003ePlug holder \u0026amp; B4 plug fitted (Round plugs also available upon request)\u003c\/li\u003e\n\u003cli\u003eTie points conveniently located under the trailer\u003c\/li\u003e\n\u003cli\u003eTie rail around the top of the trailer\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty electroplated steel safety chain\u003c\/li\u003e\n\u003cli\u003eDuo-fit coupling fits both 1 7\/8” and 50mm tow balls\u003c\/li\u003e\n\u003cli\u003eMulti-volt sealed LED Lights fitted\u003c\/li\u003e\n\u003cli\u003eLamps fitted within the rear channel at the full width of the trailer for clear visibility\u003c\/li\u003e\n\u003cli\u003ePremium, Marine sealed Japanese bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome photos may show optional extras.\u003c\/p\u003e","brand":"Kea Trailers","offers":[{"title":"Unbraked (1500KG GVM)","offer_id":67388745777401,"sku":"KEA-KC846UNBRAKED-745","price":6990.0,"currency_code":"NZD","in_stock":true},{"title":"Braked (2000KG GVM)","offer_id":67388745810169,"sku":"KEA-KC846BRAKED-746","price":8920.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/files\/KC846-front-corner-old-pic.jpg?v=1792185534"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/9544\/5497\/collections\/hf_20261016_231535_6821cf23-d147-4307-86ca-a05c02b438ae.png?v=1792192681","url":"https:\/\/www.ericksenhonda.co.nz\/collections\/tandem-trailers.oembed","provider":"Ericksen Honda","version":"1.0","type":"link"}